Cisco Multiflex Voice/WAN Card VWIC3-1MFT-T1/E1 With 1 X T1 / E1
Network Wan
VWIC3-1MFT-T1/E Overview
The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on
the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951,
3925, 3945, 3925E and 3945E integrated services routers. The T1/E1
MFT VWIC3 cards support both T1 and E1, providing additional
flexibility in configuring the Cisco MFT VWIC3s for supporting T1,
fractional T1, E1, and fractional E1 for both voice and WAN
applications. All MFT VWIC3 modules include the drop-and-insert
multiplexing capability, which eliminates costly external
third-party channel service units/data service units (CSUs/DSUs)
and drop-and-insert multiplexers.
Product Description
The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and
voice-interface-card (VIC) functions to provide unparalleled
flexibility, versatility, and investment protection through its
many uses. Customers who choose to integrate data and voice in
multiple steps preserve their investment in a T1/E1 WAN interface
because the Cisco MFT VWIC3 cards can be reused in packet voice
applications.
Introduction
The Cisco Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk
Voice/WAN Interface (MFT VWIC3s) support data and voice
applications on the Cisco 1921, 1941 and 1941W (data only), and the
Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E
Integrated Services Routers. The Cisco MFT VWIC3 combines
WAN-interface-card (WIC) and voice-interface-card (VIC) functions
to provide unparalleled flexibility, versatility, and investment
protection through its many uses. Customers who choose to integrate
data and voice in multiple steps preserve their investment in a
T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused
in packet voice applications.
The Cisco MFT VWIC3 interface cards add improvements over the Cisco
Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface
Cards (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each
port to be clocked from an independent clock source for data
applications. Voice applications can now be clocked independently
from data applications, with all ports for voice applications
clocked from a single source. The Cisco MFT VWIC3s use the ECAN on
the motherboard PVDM cards with up to 128ms echo-tail length for
demanding network conditions. MFT VWIC3 cards support up to 2
channel groups per T1/E1 port for serial data applications. Refer
to Table 3 for all configuration options offered with the MFT VWIC3
cards.
The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on
the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951,
3925, 3945, 3925E and 3945E integrated services routers. The T1/E1
MFT VWIC3 cards support both T1 and E1, providing additional
flexibility in configuring the Cisco MFT VWIC3s for supporting T1,
fractional T1, E1, and fractional E1 for both voice and WAN
applications. All MFT VWIC3 modules include the drop-and-insert
multiplexing capability, which eliminates costly external
third-party channel service units/data service units (CSUs/DSUs)
and drop-and-insert multiplexers.
VWIC3-1MFT-T1/E1 Specification
| VWIC3-1MFT-T1/E1 |
| Manufacturer | Cisco |
| Part Number | VWIC3-1MFT-T1/E1 |
| Device Type | Interface module |
| Form factor | 1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card |
| Specifications |
| Number of Ports | 1 |
| T1 Support | Yes |
| E1 Support | Yes |
| Unstructured E1 (G.703) Support | No |
| Data Support WIC Mode | Yes |
| Voice Support VIC* | Yes |
| Drop-and-Insert Multiplexing | Yes |
| Configuration Comparison |
| Serial Data (channel-group*) | 2 total
2 per port |
| Voice CAS (ds0-group**) | 24 total (T1)
31 total (E1)
1 per timeslot |
| PRI (pri-group***) | 1 total
1 per port |
| Drop & Insert (tdm-group****) | 24 total (T1)
31 total (E1)
1 per timeslot |
| Network Management Features |
| Telnet or Console | Remote and local configuration, monitoring, and troubleshooting
from Cisco IOS Software CLI |
| Simple Network Management Protocol (SNMP) | • Router and DSU/CSU managed by single SNMP agent; router, DSU, and
CSU appear as a single network entity to user • Standard MIB (MIB II) • Cisco Integrated DSU/CSU MIB • RFC 1406 T1 MIB, Including Alarm Detection and Reporting |
| SNMP Traps | Generated in response to alarms |
Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software
Release Requirements
| VWIC3-1MFT-T1/E1 | VWIC3-2MFT-T1/E1 | VWIC3-1MFT-G703 | VWIC3-2MFT-G703 | VWIC3-4MFT-T1/E1 |
Cisco 1900 Chassis EHWIC Slots | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | N/A* |
Cisco 2900 Chassis EHWIC Slots | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.1(3)T* |
Cisco 3900 Chassis EHWIC Slots | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.0(1)M3, 15.1(1)T1, 15.1(2)T | 15.1(3)T |
Cisco MFT VWIC3 Card Feature Comparison
Part Number | Number of Ports | T1 Support | E1 Support | Unstructured E1 (G.703) Support | Data Support WIC Mode | Voice Support VIC* | Drop-and-Insert Multiplexing |
VWIC3-1MFT-T1/E1 | 1 | Yes | Yes | No | Yes | Yes | Yes |
VWIC3-2MFT-T1/E1 | 2 | Yes | Yes | No | Yes | Yes | Yes |
VWIC3-4MFT-T1/E1 | 4 | Yes | Yes | No | Yes | Yes | Yes |
VWIC3-1MFT-G703 | 1 | Yes | Yes | Yes | Yes | Yes | Yes |
VWIC3-2MFT-G703 | 2 | Yes | Yes | Yes | Yes | Yes | Yes |
Company Profile
Warehouse
Represented Brands
FAQ
Other related models:
| GLC-LH-SM |
| GLC-LH-SMD |
| GLC-SX-MM |
| GLC-SX-MMD |
| GLC-ZX-SM |
| SFP-10G-ER |
| SFP-10G-LR |
| SFP-10G-SR |
| SFP-10G-ZR |
| GLC-TE= |
| GLC-BX40-U-I= |
| GLC-T= |
| GLC-SX-MMD= |
| GLC-LH-SMD= |
GLC-BX-U=
|
Please feel free to contact me for more details.
Sales: Yolanda
Mob/Whatsapp:+8618258465246
Email: yolanda@lonriseequipment.com
Skype: Yolanda-Lonrise
