| Sign In | Join Free | My burrillandco.com | 
 | 
| Ask Lasest Price | |
| Brand Name : | Cisco | 
| Model Number : | C9200-48P-A | 
| Certification : | CE | 
C9200-48P-A is the Catalyst 9200 48-port PoE+ Data Switch, withNetwork Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise C it is secure, always on, and IT simplified.


Table 1 shows the quick spec.
| Model | C9200-48P-A | 
| Downlinks total 10/100/1000 or PoE+ copper ports | 48 ports Full PoE+ | 
| Uplink configuration | Modular uplink options | 
| Default primary AC power supply | PWR-C6-125WAC | 
| Fans | FRU redundant | 
| Software | Network Advantage | 
| Stacking bandwidth | 160 Gbps | 
| DRAM | 4 GB | 
| Flash | 4 GB | 
| Switching capacity | 176 Gbps | 
| Forwarding rate | 261.9 Mpps | 
| Chassis Dimensions | 1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm | 
Table 2 shows the recommended supported products.
| Network modules | |
| Product number | Product description | 
| C9200-NM-4G | Catalyst 9200 4 x 1GE Network Module | 
| C9200-NM-4X | Catalyst 9200 4 x 10GE Network Module, spare | 
| C9200-NM-BLANK | Catalyst 9200 BLANK Network Module | 
| StackWise-80 and StackWise-160 Kit and cables | |
| Product number | Product description | 
| C9200-STACK-KIT= | C9200 Stack Kit Spare | 
| C9200L-STACK-KIT= | C9200L Stack Kit Spare | 
| STACK-T4-50CM | 50CM Type 3 Stacking Cable | 
| STACK-T4-1M | 1M Type 3 Stacking Cable | 
| STACK-T4-3M | 3M Type 3 Stacking Cable | 
| Power supplies | |
| Product Number | Product Description | 
| PWR-C6-125WAC/2 | 125WAC power supply spare | 
Table 3 shows the comparison.
| Model | Description | 
| C9200-48T-A | Catalyst 9200 48-port Data Switch, Network Advantage | 
| C9200-48T-E | Catalyst 9200 48-port Data Switch, Network Essentials | 
| C9200-48P-A | Catalyst 9200 48-port PoE+ Switch, Network Advantage | 
| C9200-48P-E | Catalyst 9200 48-port PoE+ Switch, Network Essentials | 
| C9200-48P-A Specification | |
| Downlinks total 10/100/1000 or PoE+ copper ports | 48 ports data | 
| Uplink configuration | Modular uplink options | 
| Default primary AC power supply | PWR-C6-125WAC | 
| Fans | FRU redundant | 
| Software | Network Advantage | 
| Chassis Dimensions | 1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm | 
| Virtual Networks | 4 | 
| Stacking bandwidth | 160 Gbps | 
| Total number of MAC addresses | 32,000 | 
| Total number of IPv4 routes (ARP plus learned routes) | 14,000 (10,000 direct routes and 4,000 indirect routes) | 
| IPv4 routing entries | 4,000 | 
| IPv6 routing entries | 2,000 | 
| Multicast routing scale | 1,000 | 
| QoS scale entries | 1,000 | 
| ACL scale entries | 1,600 | 
| Packet buffer per SKU | 6 MB buffers for 24- or 48-port Gigabit Ethernet models | 
| Flexible NetFlow (FNF) entries | 16,000 flows on 24- and 48-port Gigabit Ethernet models | 
| DRAM | 4 GB | 
| Flash | 4 GB | 
| VLAN IDs | 4096 | 
| Total Switched Virtual Interfaces (SVIs) | 1000 | 
| Jumbo frames | 9198 bytes | 
| Wireless bandwidth per switch | Up to 48 Gbps on 24-port and 48-port Gigabit Ethernet model | 
| Switching capacity | 176 Gbps | 
| Forwarding rate | 261.9 Mpps | 
| Mean time between failures (hours) | 375,570 | 

|   | 
 
                                 
                                 
                                 
                                