The Cisco^® 10GBASE SFP+ modules give you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber

Quick Spec

Table 1 shows the quick specs of SFP-10G-ER.

Figure 1 shows the appearance of SFP-10G-LR.

Features and benefits

Cisco SFP+ modules offer the following features and benefits.

• ● Industry' s smallest 10G form factor for greatest density per chassis
• ● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
• ● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
• ● Digital optical monitoring capability for strong diagnostic capabilities
• ● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
• ● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
  

  SFP-10G-LR Specification

  SFP-10G-ER Specifications
  Type	10GBASE-ER 1550nm SMF
  Wavelength (nm)	1550
  Transmit and Receive Wavelength (nm)	1530 to 1565
  Cable Type	SMF
  Core Size (Microns)	G.652
  Modal Bandwidth (MHz*km)	-
  Cable Distance	40km
  Transmit Power (dBm)	Maximum: 4.0 Minimum: -4.7
  Receive Power (dBm)	Maximum: -1 Minimum: -15.8
  Bail Latch Color	Red
  Power Consumption (W)	1.5
  Operating Temperature Range	COM
  Minimum Software Requirement	Cisco IOS XE Software Release 16.8.1